Awning Windows

Awning Windows in Miami Springs, FL | Winslow Windows & Doors

Awning windows hinge at the top and crank outward from the bottom, so you can leave them cracked open during a Miami Springs afternoon shower without water pouring onto the sill. That alone explains why they’ve become a staple in Florida homes from the older ranches near Curtiss Parkway to newer construction around the Miami Springs Golf & Country Club. Winslow Windows & Doors supplies and installs awning windows across our impact-rated lines, including PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass. If you’re replacing leaky, corroded windows or building new in Miami Springs, call (239) 310-4121 to talk about what fits your openings and your wind zone.

Call (239) 310-4121

Product Overview - Awning Windows

Awning windows are top-hinged, crank-out impact windows that shed rain while cracked open for ventilation. That combination of airflow and weather protection is rare in window design, and it’s the reason you see these units specified in South Florida bedrooms, bathrooms, kitchens, and anywhere homeowners want fresh air without watching the weather forecast first. The laminated impact glass sits in a weathertight frame that’s been engineered for hurricane-prone construction, not adapted to it as an afterthought.

Architecturally, awning windows work well as stand-alone units, but they shine when stacked vertically or paired with fixed picture windows. In Miami Springs, where mid-century homes and Spanish-influenced designs dominate, a row of awnings under a fixed pane gives you modern ventilation with clean sightlines. Because the sash presses against the frame when closed, the seal is tighter than a sliding window. Crank hardware pulls the sash shut from multiple points, which reduces air infiltration and makes the window genuinely quiet when locked down.

We’ve installed these in stucco-walled homes, CBS block construction, and wood-frame additions throughout Miami Springs. The frames hold their geometry year after year, which matters in a climate where summer humidity and salt air test every component. When we set an awning window, we’re not just swapping glass. We’re making sure the rough opening, the anchoring, and the perimeter seal all work as one system.

Technical Specifications

Awning windows from Winslow Windows & Doors come in two frame platforms: extruded aluminum and vinyl. Aluminum gives you the slender sightlines and structural stiffness that architects and engineers prefer for large openings and HVHZ wind loads. Vinyl offers a warmer feel and is naturally resistant to the corrosion that coastal air inflicts on lesser metals. Both platforms accept the same glass packages.

• Frame materials: Aluminum, Vinyl
• Glass options: Laminated Impact Glass with PVB interlayer, Low-E Insulated Glass, Tinted Glass, Clear Glass
• Finish options: White, Almond, Bronze, Black, Tan
• Screen options: Fixed Screen, Retractable Screen
• Design pressure: Matched to your wind zone, up to +/-100, never higher
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration; engineered to FBC HVHZ requirements

Exact sizes depend on the opening and the wind-load calculation for your specific elevation on the home. We measure every opening before an order is placed. No guesswork, no “close enough” sizing from a tape-measure sketch.

Hurricane & Compliance Performance

Laminated Impact Glass - A PVB (polyvinyl butyral) interlayer sits between two panes of glass and holds the glass in the frame under impact. If a piece of debris hits, the glass fractures but the interlayer keeps the pane together, maintaining the building envelope until a permanent replacement can be scheduled.

Miami-Dade NOA / FL Product Approval - Every awning window configuration we sell carries Miami-Dade Notice of Acceptance and Florida Product Approval numbers. These are issued per configuration, so the number that applies to your exact size, frame, and glass package gets listed on your quote and your permit submittal. We verify this for every job.

FBC/HVHZ Compliance - The units are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. This is the standard Miami Springs enforces, and it’s stricter than what applies in most of the country. We don’t sell anything on this page that falls below it.

TAS 201/202/203 Testing Context - These are the protocol family HVHZ-rated products are tested under. TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. When your permit reviewer asks how the product was tested, this is the answer.

Design Pressure for Your Wind Zone - Design pressures are matched to your wind zone, up to +/-100, never higher. We don’t oversell a stronger rating than your house needs, because that would waste your money. We also don’t undersell it, because that would fail the permit review or put your home at risk.

Energy Performance - Low-E and insulated glass options are available for those Miami Springs homes where west-facing awnings catch full afternoon sun. Tinted glass is another route for glare and heat management, and clear glass remains the most affordable choice for shaded or north-facing openings.

Color & Glass Options

The five finish options cover the range you see in Miami Springs architecture. White and Almond read clean and traditional, which suits the mid-century ranches and modest CBS homes that fill the older neighborhoods. Bronze and Black give a more contemporary look and pair well with dark window trim or painted accents. Tan is the quiet choice for stucco homes with earth-tone exteriors, blending the frame into the wall rather than calling attention to it.

On the glass side, laminated impact glass is the foundation of every awning window we install. From there, you choose your glass package based on what the room needs. Low-E insulated glass is the pick for bedrooms and living areas where heat gain is a complaint. Tinted glass works well for bathrooms, kitchens, and west-facing openings where privacy and glare matter more than maximum light. Clear laminated glass is the budget-conscious option that still meets every impact requirement. We’ll walk you through the tradeoffs during the estimate.

Installation by Winslow Windows & Doors in Miami Springs

An awning window only performs to its NOA rating if it’s installed correctly. That’s not sales talk. The anchoring schedule, the shim placement, the perimeter seal, and the water-management details all determine whether the window does its job during a real storm. We follow AAMA 2400/2410 installation practice on every opening we touch, and we use AAMA 812 low-expansion foam around the perimeter to create a consistent air and water seal.

Our process starts with a pre-install inspection of each rough opening. We check the existing condition of the block or wood framing, look for rot or spalling, and confirm the opening is square before we order a piece of custom glass to fit it. On install day, we set the window level, plumb, and square, then anchor it per the manufacturer’s HVHZ instructions for your wind zone. The perimeter gets the AAMA 812 foam seal, we run a water test to verify no leaks at the sill or jambs, and we clean up the work area before we leave.

Permitting is part of the deal in Miami Springs. The city enforces HVHZ requirements, and your permit reviewer will want to see the Miami-Dade NOA and Florida Product Approval numbers that match your order. We provide those documents with every quote and every submittal. Improper installation compromises the rated system regardless of what the paperwork says. That’s why we’re deliberate about measurement, anchoring, and sealing. We’ve installed this product line in Miami Springs homes for years, and we’ve never lost a window to a storm. That’s the standard we hold.

Frequently Asked Questions - Awning Windows

What wind zone and design pressure is the awning window rated for? The design pressure is matched to your specific wind zone and elevation, up to +/-100, never higher. Miami Springs sits in a high wind zone that the Florida Building Code defines precisely by address and exposure. When you call, we’ll calculate the exact rating your openings require and spec the window to meet it. Call (239) 310-4121 for your home’s exact numbers.

What is the lead time for impact awning windows in Miami Springs? Lead times vary by manufacturer and configuration, but most awning window orders run four to eight weeks from deposit to delivery in the Miami area. Custom sizes, specific finishes, and certain glass packages can push that window out. We confirm availability when we quote, and we’ll give you a realistic date rather than an optimistic one. Call (239) 310-4121 to check current lead times for the line you’re considering.

Does my Miami Springs permit require a Miami-Dade NOA or Florida Product Approval submittal? Yes. Miami Springs follows HVHZ permitting rules, and your reviewer will require the NOA and Florida Product Approval numbers for the exact configuration being installed, including size, frame, and glass package. We provide those documents as part of every quote and permit packet. Call (239) 310-4121 and we’ll explain what your specific job requires.

Can I customize the size or configuration of my awning windows? Yes, within the structural limits of the frame system and your wind-load calculation. Awning windows can be ordered in a wide range of widths and heights, and they combine well with fixed windows for larger openings. Your exact options depend on the manufacturer and design pressure. Call (239) 310-4121 with your rough opening dimensions and we’ll tell you what’s possible.

How do I maintain the frame and hardware on an awning window? Keep the tracks and hinges clean with mild soap and water, and wipe down the gaskets a couple times a year. In Miami Springs, salt air plus humidity is hard on window hardware, so we recommend checking the crank mechanism and hinge points annually. If the crank ever feels rough, address it before it binds. For anything beyond routine cleaning, call (239) 310-4121 and we’ll take a look.

Get a Quote - Awning Windows in Miami Springs

Ready to replace the windows that fog, bind, leak, or rattle every time a storm rolls through Miami Springs? Call Winslow Windows & Doors at (239) 310-4121 to schedule a free on-site measurement. We’ll walk your openings, discuss glass and finish options, and put a written quote in your hands with real lead times and the exact NOA numbers your permit requires. No pressure, no change orders. Just a clean number for a properly installed impact window.

Written by the team at Winslow Windows & Doors, serving Miami Springs, FL and surrounding Miami-Dade County since our founding.