French & Double Doors

French & Double Doors in Miami Springs, FL | Winslow Windows & Doors

French and double doors bring a sense of openness and light to a home, but in Miami Springs they carry a job beyond aesthetics. They have to stand up to the real possibility of hurricane-force wind and flying debris. That’s where an impact-rated pair of doors makes the difference. Winslow Windows & Doors has been installing and servicing these openings across Miami Springs and greater Miami-Dade County for years, and we understand both the architectural appeal and the structural demand. Our French and double door installations run level, plumb, and square, and we carry the Miami-Dade NOA and Florida Product Approval paperwork your permit office will ask for. Call (239) 310-4121 to talk through your opening.

Call (239) 310-4121

Product Overview - French & Double Doors

Paired impact-rated French doors feature laminated glass in every lite, which means the glass itself is engineered to stay in the frame under impact rather than shattering into the room. That matters in Miami Springs, where an unprotected opening becomes a breach point in a storm. When wind pushes through a broken pane, pressure builds inside the house and lifts the roof. An impact-rated French door closes off that failure mode. These doors offer symmetrical sightlines, so the left and right panels read as a matched pair, and they include multi-point locking hardware for interior-to-exterior openings. Multi-point locks engage at the head, sill, and jamb, not just a single latch point, which improves both forced-entry resistance and weather sealing. Architecturally, the profile works on Florida ranch homes, Mediterranean-style villas, and the 1950s cottages common throughout Miami Springs. We build the frames in aluminum or vinyl. Aluminum carries a slimmer sightline and higher design pressure capacity. Vinyl costs less up front and brings built-in thermal break qualities. Both run through the same impact glazing options, and both require proper anchoring to meet HVHZ standards. This is not a door where you can skip the rough opening prep or reuse old anchors. The frame, the glass, and the attachment all work as one rated assembly.

Technical Specifications

• Frame materials: Aluminum, Vinyl.
• Maximum size: Up to 96″ wide for paired configurations.
• Glass options: Laminated Impact Glass with PVB interlayer, Low-E Insulated Glass, Tinted Glass, Clear Glass.
• Finish options: White, Almond, Bronze, Black, Tan.
• Locking hardware: Multi-point locking system engaging at head, sill, and jamb.
• Design pressure: Matched to your Miami Springs wind zone, up to +/-100. We never overstate a rating beyond what the tested configuration supports.
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration. Engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements.

Hurricane & Compliance Performance

Laminated Impact Glass
Every lite in the French and double door carries laminated impact glass. A PVB interlayer sits between two panes, and that interlayer holds the glass in the frame when a windborne object strikes. The glass may crack, but it stays in the opening, keeping wind and rain out of the house.

Miami-Dade NOA / Florida Product Approval
Qualifying configurations carry Miami-Dade NOA and Florida Product Approval numbers. Because ratings are issued per configuration, the exact number applies to the specific door assembly you order. We verify the approval on your quote so the permit package in Miami Springs is correct.

FBC / HVHZ Compliance
These doors are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. Miami Springs sits inside an HVHZ jurisdiction, which means the building department expects the stricter standard. A non-HVHZ door will not pass plan review here.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under a protocol family that includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. The products we install in Miami Springs are built and rated within this testing framework.

Design Pressure for Your Wind Zone
Design pressure is matched to your exact wind zone in Miami Springs, up to +/-100. We never quote a higher number than what the tested configuration allows. A door rated for a lower pressure will not satisfy the building department if your opening requires the full capacity.

Energy Performance Option
Low-E and insulated glass options improve heat rejection and cut solar gain through oversized openings. In a Miami Springs summer, a west-facing French door without Low-E can turn a living room into a greenhouse. It’s an option worth pricing, especially on openings without a covered porch.

Color & Glass Options

The finish palette for these doors includes White, Almond, Bronze, Black, and Tan. In Miami Springs, where the housing stock runs from 1920s bungalows to newer Mediterranean construction, the two finishes we see most are White and Bronze. White suits the crisp, shaded porch look on older cottages. Bronze suits earth-toned stucco and tile roofs, and it hides salt haze better near the canal-side streets. Almond and Tan work well on ranch homes with beige or cream stucco. Black reads modern and gives strong contrast against light-color walls. For glass, Clear Laminated Impact is the baseline: full impact protection, no tint. Tinted Glass adds solar control and cuts glare on east and west openings. Low-E Insulated Glass builds on the impact package with a thermal and UV barrier that keeps the air conditioning load lower. Every glass option carries the same PVB interlayer, so you never trade impact performance for energy performance in Miami Springs.

Installation by Winslow Windows & Doors in Miami Springs

A hurricane-rated French door is only as good as the installation that anchors it. We see improperly set openings in Miami Springs all the time: shims left loose, anchors skipped, perimeter seals that fail after one wet season. An impact-rated assembly tested under TAS protocols loses its performance if the frame is not set level, plumb, and square, and if the anchor schedule does not match the approved installation sheets. That is why Winslow Windows & Doors follows AAMA 2400 and 2410 practice on every installation, and we use AAMA 812 low-expansion foam as the perimeter sealant. The foam seals the gap without bowing the jamb, which is a common failure when someone uses a high-expansion product. After the doors are set and the hardware engaged, we run a water test at the sill and jambs to catch any seal issue before the job closes out. For Miami Springs specifically, we check for prior moisture damage at the rough opening, which is common in older block-and-stucco construction. If the sub-sill is deteriorated, the new door cannot seal correctly. We also handle the permit paperwork: Miami Springs, as part of Miami-Dade County, enforces HVHZ submittals, and your permit package will need the NOA or Florida Product Approval for the exact configuration you buy. We provide that documentation as part of the project.

Frequently Asked Questions - French & Double Doors

Get a Quote - French & Double Doors in Miami Springs

If you live in Miami Springs and you’re replacing a patio opening, a front entry, or a set of swinging doors that pre-date the current HVHZ code, let’s talk. We’ll measure your opening, check the sub-sill and framing, and put together a line-item quote with design pressure and the NOA or Florida Product Approval documentation for your permit. Call (239) 310-4121 to schedule a free on-site measurement and project discussion. No pressure, just the numbers you need to make a decision.

Written by the team at Winslow Windows & Doors, serving Miami Springs, FL with hurricane-impact windows and doors, including French and double doors across the PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines.