Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterES Windows Shingle, Tile & Metal Roofing in Miami Springs: What to Know First
We provide independent ES Windows shingle, tile, and metal roofing service in Miami Springs, with most repairs completed same day and full replacements typically scheduled within one to two weeks. Pricing is upfront and fixed, with written line-item quotes so you know exactly what you’re paying before any work begins. If you own a Miami Springs home with ES Windows and the roof over them is failing, call (239) 310-4121 for a free estimate.
This page is for homeowners who already have ES Windows installed, or are planning to pair them with a new shingle, tile, or metal roof, and want one local company that understands both systems. Ed Winslow grew up in Miami Springs and built Winslow Windows & Doors around a simple idea: the roof and the windows have to work as one envelope, or neither one protects the house the way it should.
How ES Windows Products Fail, and How We Fix Them
- ES Windows Series 3000 casement and awning units: flashing failure at the head. We see this constantly in Miami Springs homes built in the 1980s and early 1990s. The original roof-to-window flashing was often a single piece of galvanized metal with no back dam, and once Miami Springs’s summer downpours get behind it, water runs straight down the interior wall. We fix it by pulling the shingle or tile course above the window, installing a proper step flashing with a kick-out diverter, and re-bedding the tile or re-sealing the shingle edge. The window itself is usually fine, it’s the roofing connection that failed.
- ES Windows Series 4000 fixed picture windows: seal degradation from salt air. Miami Springs sits close enough to the coast that salt haze is a factor, especially for homes along the Curtiss Parkway corridor. On ES Windows 4000 series units, the exterior sealant at the top mullion junction degrades faster than the glass or frame. Once that seal goes, water sits on top of the window and eventually rots the subsill below the shingle or tile roof edge. We remove the affected course, replace the subsill with pressure-treated material or composite, re-seal with marine-grade sealant, and re-install the roofing to shed water away from the frame.
- ES Windows Series 8000 horizontal sliders: track corrosion from roof runoff. If gutter placement above an ES Windows 8000 slider is even slightly off, roof runoff sheets down the glass and pools in the bottom track. The aluminum tracks on these units are not marine-grade in all years, and repeated ponding corrodes the track and seizes the rollers. We correct the roofing side first, re-pitch the gutter or add a drip edge diverter, then replace the track and rollers with corrosion-resistant aftermarket parts. ES Windows no longer stocks tracks for some older 8000 run years, which is a detail the manufacturer’s site won’t tell you.
- ES Windows Series 5000 single hung: sill pan omission under tile roofs. On a tile roof, the area directly below the window takes a beating. If the original installer skipped the sill pan, Miami Springs’s wind-driven rain pushes water under the tile, into the wall cavity, and down onto the window header. We pull the affected tile, install a full sill pan with end dams, re-flash the head and sides, and re-set the tile. The fix holds because we treat the window as part of the roof assembly, not a separate component.
- ES Windows impact-rated lines: seal failure at the glazing bead. On ES Windows impact units, the glazing bead can lose its seal after years of thermal cycling under a metal roof, which radiates more heat downward than shingle or tile. The seal dries out, the bead pulls away, and you get condensation between panes. We replace the bead and re-seal with a flexible, UV-stable compound rated for South Florida’s temperature swings. It’s a minor repair on paper, but it stops the window from fogging permanently.
Our techs know which ES Windows failure is actually a roofing problem and which is a window problem, because we work on both sides of that joint. That’s the difference between paying for one repair and paying for three.
Our ES Windows Shingle, Tile & Metal Roofing Process
- 1
Call us at (239) 310-4121. A live person answers, day or night. We schedule a time that works for you, and there’s no trip charge inside our home county.
- 2
We do a full assessment. We inspect the ES Windows units, the flashing, the underlayment, and the roof surface, shingle, tile, or metal. We document everything with photos and show you what we found.
- 3
We give you a written line-item quote. The price is fixed. No change orders, no surprises on the invoice. We also offer a free second opinion on any written estimate you already have.
- 4
We make the repair or replacement. We use OEM ES Windows parts when warranty or exact match is required, and quality aftermarket parts when they outlast the originals, which they often do in Miami Springs’s climate.
- 5
We test the seal. After repairs, we water-test the window and roof connection to confirm no leaks before we re-install the final course.
- 6
We stand behind it. Every job carries the Done Right Promise: if it’s not done right, Ed Winslow makes it right. Period.
What ES Windows Shingle, Tile & Metal Roofing Costs in Miami Springs
At Winslow Windows & Doors, the honest price posture is this: an owner is not ready to buy, but ready to price. So here are real Miami Springs ranges for common ES Windows roofing scenarios:
- Re-flash one ES Windows unit under shingle: $250-$450
- Re-flash one ES Windows unit under tile (includes re-bedding): $400-$700
- Replace subsill and seal on one ES Windows picture window: $500-$850
- Full ES Windows shingle, tile & metal roofing tie-in plus gutter correction: $1,200-$2,500
- Complete re-flash of all windows on a Miami Springs home: $3,000-$8,000 depending on window count and roof type
What moves the price: roof type (tile is more labor-intensive than shingle), window count, accessibility, and whether we’re also correcting an underlying gutter or underlayment problem. All estimates are free and written. Call (239) 310-4121.
Why Miami Springs Homeowners Call Winslow Windows & Doors for ES Windows Work
We’re the one down the road. Ed Winslow grew up in Miami Springs, and his name is on the truck. That means we answer for every window, door, and roof joint we touch. Our techs are background-checked, arrive in uniform, and call before the truck pulls up. We install and service ES Windows alongside PGT, CGI, CWS, and ECO Window Systems, so you get real-world knowledge of how multiple brands hold up under the same Miami Springs sun. The Done Right Promise backs every single job, and a live person answers every call, every hour, every day. My name is on the truck, and that means I answer for every window we touch.
FAQs
No. As an independent ES Windows service provider, we follow warranty-safe practices, using OEM parts when required and documenting every step. The roofing work we do does not void your ES Windows warranty, and we give you the paperwork to prove it.
Some are, some aren’t. ES Windows has discontinued several track and hardware lines for older series, especially the 8000 sliders. We source quality aftermarket parts that match or exceed the original spec, and we tell you which parts are OEM and which are aftermarket before we install anything. Call (239) 310-4121 for an exact parts check.
Most of the time we can repair the roof-to-window connection without replacing the window itself. The failure is usually in the flashing, sealant, or subsill, not the glass or frame. We’ll tell you straight if replacement is the better long-term call, and we’ll quote both options so you can decide with real numbers in front of you.
Fast. We answer the phone live 24/7, and for roof leaks we prioritize calls because water damage compounds hourly. Call (239) 310-4121 and we’ll get a tech out as soon as possible, no voicemail loops and no call centers.
No. Our quotes are fixed, written, line-item, and signed. If we find something unexpected inside the wall, we stop, show you, and get your approval before any additional work. You will never see a surprise on the invoice. Ever.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Miami Springs and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.