Arched & Curved Windows in Miami Springs, FL

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Arched & Curved Windows in Miami Springs, FL

Arched and curved windows in Miami Springs, FL can be measured, fabricated, and installed with impact-rated glass to meet Miami-Dade County’s strict wind-load and building code requirements – typically within two to four weeks from the initial site measure. Whether you have a true half-round above your front door, a pair of eyebrow windows flanking a center gable, or a full elliptical unit framing a garden view, Winslow Windows & Doors has been fitting our Custom & Geometric Windows services into South Florida homes since 2011. Ed’s name is on every job, and that means the measurement is right the first time or we come back and make it right – that’s the Done Right Promise, no asterisks.

If you’re trying to figure out where arched and curved windows fit in the broader world of specialty glazing, our Custom & Geometric Windows in Miami Springs page gives you the full picture. For a straight answer on your specific opening, call us at (239) 310-4121 – a real person picks up around the clock, any day of the week.

Miami Springs is an interesting neighborhood to work in. The city’s older Mediterranean Revival and Spanish Colonial homes – many built in the 1920s and 1930s along Circle Drive and Westward Drive – were designed with curved architecture from the ground up. Arched window openings are structural features in these houses, not decorative add-ons. When those original wood frames finally give out after a century of humidity, salt air, and seasonal storms, replacing them with a modern impact-rated unit requires a fabricator who understands both the architectural intent and Miami-Dade’s current NOA (Notice of Acceptance) requirements. That’s the work we do every week in this city.

When You Need Arched & Curved Windows

• Your current arch is single-pane and unrated. Many homes in Miami Springs still have original single-lite arched windows that predate impact requirements. During a storm these become a serious liability – Miami-Dade code now requires opening protection on all glazed openings, and unrated arches are a common inspection flag during real estate transactions.
• Wood rot has compromised the curved frame or sill. Miami’s humidity is relentless, and wood arched frames above entry doors absorb water at the curved joint where end-grain is exposed. When the wood goes soft, air and moisture start pushing through – you’ll often notice paint bubbling on the interior trim before you see any visible rot on the outside.
• Condensation is pooling on the interior glass surface. Older single-pane arched units have no thermal break, so in the six months a year when Miami Springs residents run central air, the glass sweats. Pooled condensation at the base of an arch leads to mold inside the rough opening faster than most homeowners expect.
• You’re adding an addition or converting a garage and want the new opening to match your home’s existing arched profile. New construction on a Mediterranean or Spanish Colonial home in Miami Springs that doesn’t match the existing arch radius sticks out architecturally and can affect resale value. A custom-fabricated unit matched to your existing radius keeps the look cohesive.
• Your current arch leaks around the keystone or crown. The apex of an arched frame is where sealant fails first – the curve creates movement that flat window caulk can’t accommodate over many seasons. Water staining on interior walls directly above an arched opening is almost always traced back to crown-seal failure.
• You’re upgrading to impact glass throughout and the arch doesn’t match the rest. A lot of Miami Springs homeowners replace their standard rectangular windows with PGT or CGI impact units and then realize they left the arched transoms in place. Mixing impact and non-impact openings doesn’t satisfy the full-protection requirement, and it leaves your roof-to-wall connection vulnerable during high-wind events.

Our Arched & Curved Windows Process

1. On-site precision measure. Arched openings cannot be measured from a photo or a floor plan. We come to your Miami Springs home, measure the chord width, the rise (height from the spring line to the crown), and the radius – then check for any irregularity in the rough opening that would affect the finished fit. Older homes on Westward Drive or around the Springs Country Club often have openings that look symmetrical but aren’t, and a millimeter error in radius becomes a visible gap at the crown.
2. Code and permit verification. We pull the applicable Miami-Dade or City of Miami Springs permit before fabrication begins. Impact-rated arched units need a product approval number (NOA) on file with the county, and our authorized brands – including PGT – carry the documentation. We handle the paperwork; you don’t need to navigate the permit counter.
3. Custom fabrication order. Your measurements go directly to the fabricator. For true arches and ellipses, the frame extrusions are bent to radius in controlled conditions – this is not a field modification. Lead times in the current South Florida market run two to four weeks depending on glass specification and frame finish. We give you a confirmed date before you sign anything.
4. Pre-installation site prep. On installation day, our background-checked, uniformed crew protects your interior flooring and removes the existing unit without damaging the surrounding plaster or stucco – a real concern in Miami Springs homes with original 1920s plaster walls. If we find rot in the rough framing during removal, we document it and give you options before we proceed.
5. Installation and flashing. The new unit goes in level, plumb, and shimmed to the radius. Flashing tape and sealant are applied to the manufacturer’s specifications – critical on an arched crown where water management is more complex than on a flat head. We don’t cut corners on flashing because that’s where callbacks come from, and our Done Right Promise means every callback costs us, not you.
6. Inspection sign-off and cleanup. We schedule and pass the final building inspection. When the inspector leaves, we clean the glass, remove all job debris, and walk you through the finished unit. You get the inspection card and the product documentation for your records – useful if you sell the home and a buyer’s inspector asks for proof of compliance.

Arched & Curved Windows Pricing in Miami Springs

Arched and curved window pricing in Miami Springs runs higher than standard rectangular units because every component – frame, glass, installation – is custom to your specific opening, including Custom Impact Windows options. Below are honest ranges based on current South Florida market conditions. These are not guarantees; your final number depends on the variables listed beneath the table. Call (239) 310-4121 for a free, no-trip-charge estimate at your home.

What Affects Your Final Cost

• Radius and rise: A tighter radius requires more precise frame bending and more material waste in fabrication. A unit that looks only slightly curved can cost as much as a full half-round if the radius is unusually tight.
• Glass specification: Standard impact laminate is the baseline. Low-e coatings, higher SHGC ratings for energy performance, or decorative glass (obscure, frosted, or art glass) all add to material cost. In Miami Springs, where afternoon sun hits west-facing facades hard, a low-e coating often pays back in energy savings within a few years.
• Frame material and finish: Aluminum is the default for South Florida’s salt-air environment. Painted finishes in custom colors cost more than standard white or bronze. Interior wood-clad options are available through some of our brands for homes where the interior trim look matters.
• Existing opening condition: If the rough framing is solid, installation is straightforward. Rot, out-of-plumb framing, or damaged stucco around the opening adds labor and material cost. We find this in older Miami Springs homes more often than in newer construction.
• Access difficulty: Second-story arched windows above an entry portico require staging or lift equipment. That adds to labor cost and should be factored into your estimate from the start – not discovered on installation day.

Seniors and veterans receive a permanent 10% discount on all services. Any repair over $200 qualifies for $40 off. If you have a written estimate from another contractor, we’ll give you a free second opinion – no pressure, no obligation. Estimates at your Miami Springs home carry no trip charge.

Why Miami Springs Homeowners Call Winslow

Miami Springs sits inside a market flooded with window companies, but most of them are regional chains that route your call to a dispatch center and send whoever is available. When you call Winslow, Ed Winslow’s operation picks up – a live person, any hour – and if there’s a question only the owner can answer, Ed answers it. That’s not a marketing line; it’s how a 13-person, locally owned operation actually works.

We’ve been authorized installers for PGT long enough to know which product lines hold up in the Miami Springs microclimate – the afternoon heat load on west-facing facades along Circle Drive, the salt-air exposure for homes within a few blocks of the Miami River corridor, the way older plaster walls move differently than modern drywall during thermal cycling. That kind of local knowledge doesn’t come from a national training manual.

The Done Right Promise is the clearest thing we can say about how seriously we take our work. It’s not a warranty card you file and forget. It’s Ed’s commitment that if something we did isn’t right, we come back and fix it. No national chain offers that because no national chain has an owner whose reputation is tied to every job in a single community.

And if you want to see the full range of specialty window shapes we install – triangles, trapezoids, octagons, and more – the home page gives you a complete look at everything Winslow does in South Florida.

Key Takeaways

• Arched and curved windows in Miami Springs must meet Miami-Dade impact and NOA requirements – standard decorative arches from a home center don’t qualify.
• Installed prices typically run $650 to $3,400+ depending on size, radius, and glass spec. Custom compound curves can go higher.
• Older Miami Springs homes (especially 1920s-1940s Mediterranean Revival) often have irregular openings that require on-site precision measurement, not remote quoting.
• Winslow pulls permits, handles the fabrication order, and schedules the county inspection – you don’t manage the paperwork.
• The Done Right Promise means any defect in our work gets corrected, period.
• Seniors and veterans get 10% off, always. Repairs over $200 get $40 off. No trip charge for estimates in the home county.

FAQs – Arched & Curved Windows in Miami Springs

Do arched windows in Miami Springs have to be impact-rated?

Yes – any glazed opening in a Miami-Dade County structure, including Geometric & Shaped Windows like decorative arched transoms and eyebrow windows, must either be impact-rated or protected by an approved storm shutter system. A standard tempered or annealed arch from a home improvement store does not meet the county’s NOA requirement and will fail a building inspection. If you’re replacing an existing arch that predates the current code, the replacement unit must be brought into compliance. Call (239) 310-4121 and we’ll confirm exactly which product approval numbers apply to your opening at no charge.

How long does it take to get a custom arched window made and installed?

From the day we measure your Miami Springs opening to the day the unit is installed and inspected, expect four to seven weeks in the current market. The fabrication lead time alone is typically two to four weeks, depending on the complexity of the radius and the glass specification you choose. Permit processing in Miami-Dade generally adds five to ten business days. We give you a confirmed timeline before you commit – not an estimate that shifts after you’ve signed.

Can I keep my existing arched opening and just replace the glass?

Sometimes, but less often than homeowners expect. If the existing frame is structurally sound, aluminum, and already impact-rated, a glass-only replacement may be possible. In Miami Springs, most arched openings we see in pre-1980 homes have wood or outdated aluminum frames that don’t carry a current NOA, which means the full unit needs to go. We assess the existing frame during the initial measure and give you an honest answer before any work begins.

Is it cheaper to cover the arch with a shutter instead of replacing it with an impact unit?

In the short term, yes – a fabric or accordion shutter over an arched opening costs less upfront than a custom impact-rated replacement. But shutters have to be deployed before every storm event, require maintenance, and do nothing for daily energy efficiency or air infiltration. For a decorative arch above a front entry – a high-visibility location in most Miami Springs homes – a permanent impact-rated unit also looks significantly better year-round. If budget is the primary concern, we can walk you through both options with actual numbers. Call (239) 310-4121 for a free estimate on either approach.

Ready to Get Started?

If you have an arched or curved opening in your Miami Springs home that needs attention – whether it’s a rotted wood transom above your front door, a non-rated arch from a previous renovation, or an Oversized Opening for new construction – call Winslow Windows & Doors at (239) 310-4121. A real person answers every call. We’ll schedule a free on-site measure at your Miami Springs address, confirm the permit requirements, and give you upfront pricing before any fabrication order goes in. No voicemail, no callbacks from a call center, no surprises on the invoice. Ed’s name is on the door – and on every job we do.

Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Miami Springs since 2011.